How to deal with steel structure fluorocarbon paint

2019-09-11 14:35:13

1. Wash away salt and other water-soluble contaminants with clean water;


2. Remove grease according to SSPC-SP1 solvent cleaning specification;


3, remove the welding splash and deal with the weld, the burr makes it smooth;


4, using sandblasting to remove rust, oxide scale and damaged shop primer large ISOSA2.5 (SSPC-SP10);

钢结构氟碳漆

5, can also manually derusting up to St3 level;


6. Purge and remove dirt such as dust with high-pressure air;


7. Recognize that the appearance is clean and dry before construction;


8. The surface treatment roughness is 30-70 μm.


Article from: Steel structure fluorocarbon paint  http://www.zsguansen.com/


Navigation Call About Product